The Tail section.

A little bit trickier.

First remove the existing light cap and dremmel out to hold the led.

 

Quite a bit to take out and not damage the holder.

Once the led is sat in it looks like the real thing.

 

 

Next the horizontal stabiliser.

Mark out and drill holes for led and wires, I use solder to feed through and pull wires in.

Fix led in position and feed wires through the tail.

 

Once through the tail I soldered on wire extensions and passed both sets through some heat shrink to tidy it up.

All ready for painting.

Next page.

Back to top